mcarterbrown.com - View Single Post

Mechanic959 · 01-17-2008, 03:58 AM

Hey guys, A while back I picked up a box of markers that were all in pieces. Including a really beat up 2k lcd .I disassembled it so i can clean all the years of gunk out of it. I'm having trouble with the pivot rod for the breech, just not sure how it's removed . I took both set screws at either end. Is the rod threaded in the body or just a slip fit ? How is a good way of removing it ? any ideas are appreciated. Also where could i find a rebuild kit for it ? seems i bit hard to find for me.

Thanks!
Rich A.

01-17-2008, 03:58 AM	#1 (permalink)
Mechanic959 Newbie Join Date: Sep 2006 Posts: 27	Rebuilding a 2k lcd ..... questions? Hey guys, A while back I picked up a box of markers that were all in pieces. Including a really beat up 2k lcd .I disassembled it so i can clean all the years of gunk out of it. I'm having trouble with the pivot rod for the breech, just not sure how it's removed . I took both set screws at either end. Is the rod threaded in the body or just a slip fit ? How is a good way of removing it ? any ideas are appreciated. Also where could i find a rebuild kit for it ? seems i bit hard to find for me. Thanks! Rich A.