View Single Post
Old 05-06-2014, 06:15 PM   #8 (permalink)
engineer minded
Vitalsilence's Avatar
Join Date: Aug 2012

Its a balance. And I 've found that the jcurt measurement guide doesn't allow for proper bolt clearance. It also makes for a stiff stroke too early in the stroke. Take jcurt measurements and add .125 or 1/8" also add about .025 to the body so you don't hit the slot on the back of your stroke.
Ebay Feedback %100 positive
MCB feedback
PBNation Feedback
Also on customcockers

Originally Posted by Nuke View Post
Some people are penny wise, and dollar foolish.
Vitalsilence is offline   Reply With Quote