Thread: Dye box rotor
View Single Post
Old 06-07-2014, 12:08 AM   #3 (permalink)
tjd10684
MCB Member
 
tjd10684's Avatar
 
Join Date: Jul 2009
Location: Beaver Falls PA (outside Pittsburgh)

I would agree but if you ever get a chance to really look at one I think the capacity is a side effect of other necessary design features. The ball ramp has to go to where the mag normally feeds and I think its about at the max angle it can be so it cant really be much shorter. Then the loading ports need to be a certain size so you can load it. I actually think the loading ports are a bit small but I'll have to play with it a couple times to say for sure. If you look at where everything else has to be biased on those features you get something about the size that you see now.
__________________
My Feedback - http://www.mcarterbrown.com/forums/f...ml#post1575817

I also freak bore
http://www.mcarterbrown.com/forums/a...ml#post2393405

A wise man once said:
"The gap between theory and reality is not as far in theory as it is in reality."
tjd10684 is offline   Reply With Quote