| So I have cut everything off the hammer and put a new long screw out of the back along with about 25 heavy washers. Then I took JB weld type stuff and made one whole entire hammer. This hammer is a beast and is heavy... The magnets are on the way and so far without the magnets its going fully pretty darn good but just not solid. I only need the magnet to do a very small pull and I will be able to get a QPOD off without a break(I hope)... This will be the ultimate Mule as it kicks and jumps letting off bursts. Cut the barrel to 5' and flipped the guard backwards as a front foregrip and its ready for someone to run into a enemy's bunker letting off noise, co2 clouds and paint... |