it's special... it needs an outside HPR... thinking of an old WGP ergo or BM reg...
and i did get it firing off of 12g's..
it appears that now i have adjusted it slightly too far and it has a slight leak from the valve (from the hammer-carrier pressing against the valve pin)
all that being said though, it's friggen LOUD
once i get the trigger propperly set up, it will have the trigger pull length of a 3-way and probably be electro-light
routing the LP lines to the inside of the frame is one major bitch though, everything wants to pinch, i might need to take some quality time with a dremel to make propper routing channels.
can;t wait to get an un-ported barrel and a loudener on this sucker though
