| Ok guys,
sorry about this zombie thread, but I got an airline kit for this thing on eBay, and have it all put together and fixed up. But whenever I run air through the marker it all comes running out the barrel. If I break it down into 2 pieces (take out the two large screws at the midsection in front of trigger guard) and gas up the back end of the marker, all of the air holds. When I put the front end on, the back of the powertube pushes the forward plunger back into the valve, leaving it open for air to rush through.
Could I be doing something wrong? I have looked at the parts breakdown on tippmannparts and everything has been installed correctly from what I can see, but there is one thing; mine seems to have a hole in the body right below the valve where a roll pin could possibly have been located, but that is not listed on the parts breakdown, nor are there any marks/scratches around the edges of the holes to show that one was removed.
Any suggestions? Thanks!
__________________
Isaiah 29:16
"You turn things upside-down, as if the potter were thought to be like the clay! Shall what is formed say to him who formed it, 'He did not make me'? Can the pot say of the potter, 'He knows nothing'?
|