View Single Post
Old 09-24-2006, 01:40 PM   #4 (permalink)
MCB Member
HP_Lovecraft's Avatar
Join Date: Aug 2006
Location: Southern Maine

If the pin depressor in the fill-station ASA is taller then the ORING, then you might needer either: 2 orings, or just find a bigger oring.

If, if the pin-depressor is adjustable, then just don't turn it in all the way.

If you see enough thermo-valve tanks, then its trivial to make an adapter that couples the Tippmann-style threads with the thermo style threads

HP_Lovecraft is offline   Reply With Quote