| ok, LT, the spring im talking about is the striker spring, and im using a 4.5k dye throttle tank with a preset output of 800PSI which i confirmed is working with my speedball gun. So the tank/ input pressure cant be the problem, i also double checked with my other 4.5k tank that also runs 800PSI out.
gumby, yesss it is the coupler, and the forward spring on it is loose because the small metal ring that held it in place on the coupler is missing. Also, i only aired it up slowly after i tryed airing it up the normal way, so i dont ussually do that. and so like i said before, the gun is getting 800psi in.
Ok, so the retainer looks fine, if it the peice that looks like ___l from the side. sorry about that crude drawing, but could you explain the timing collar, it is possible that this is the problem, as i once had to remove the piston and housing from the rear assembly because one of piston heads came off the end of the coupling, |