Thread: AT leaking
View Single Post
Old 04-02-2008, 07:54 PM   #5 (permalink)
Steelrat
Active Member
 
Steelrat's Avatar
 
Join Date: Feb 2008
Posts: 274
Now it gets even goofier. I rechecked the reg, set it flush with the scribe pointed in toward the barrel. Put on the tank, and the hissing started again, though the gun cocked. I fired a few rounds, and it was hissing loudly the whole time. Then, while firing actual paint, the gun fired, then started hissing even more loudly, with air seeming to come out the back of the gun pretty rapidly. I took the tank off, took out the mag, and looked inside, and there was a ball lodged partway in the barrel.

I'm guessing it should just go to ATS.
Steelrat is offline   Reply With Quote