View Single Post
Old 04-04-2008, 11:01 PM   #9 (permalink)
MaD
MCB Member
 
MaD's Avatar
 
Join Date: Oct 2007
Location: A2, Michigan

Discovered a couple and just got them today... need a bit O help though..

Fluster #1867
Feedneck JB welded on.. won't know if it's stripped until I get that crap off. I think the factory reg is gutted (assuming that's why the spyder reg is on there). Back board is missing the red LED and charging plug and someone decided it would be a bright idea to take a dremel to the milling on the right side. however she gasses up and shoots fine!






Chrome BBT #2586

Internals are out and misc pieces are in bags. I believe I have most of them but the noid is apart and if it's all there, I assume junk. Electronics seem ok. A bit scratched up, but most of the chrome is intact except for a few spots on the back of the barrel. I think I know which one the good noid will be in shortly..

__________________
-= MaD =-
Sheridan Seals, Valve Tools, and Parts
Feedback
DIY Paintball Stuff!

Note: While I would love to take credit for his work, I am not associated with Mad Customs!
You can contact BigMatt-MadCustoms in his MCB forum
MaD is offline   Reply With Quote