| My typical way of adjusting regs (no gauges) goes like this:
1. Zero everything
2. Crank the LPR way up
3. SLOWLY increase HPR until noid starts to leak
4. Back LPR out until noid quits leaking, then go half a turn more
5. Adjust HPR for velocity/consistancy
6. Mow faces
After I do that, I very rarely have to adjust much, maybe an 1/8 turn on the HPR or LPR to get velocity/consistancy I am after. I'm sure since it's been about 6 months since I have shot a ball I might have to go 1/4 turn, but that's the breaks.
__________________
I like PPS, ICD and old Volkswagen products.
I am more than a block of wood. 63VDub's feedback Quote:
Originally Posted by incynr8  i can assure you this marker is probably long gone, simply based on the MCB to earth year conversion. | |