mcarterbrown.com - View Single Post

sdawg · 04-06-2008, 12:02 AM

Can anyone say for certain that an Ion feed neck should not be used on a ProMaster? I have an Ion feedneck that I tried screwing onto my ProMaster, and it seems to be the same threads. However, I also know that there are feednecks made specifically for ICD markers (although not specifically the ProMaster).

I've heard that putting an Ion feedneck on a ProMaster can result in the feedneck hole's threads being stripped. Does anyone have any first-hand experience with this problem?

thanks, MCB.

04-06-2008, 12:02 AM	#1 (permalink)
sdawg MCB Member Join Date: Dec 2006 Location: Texas Posts: 1,410	Ion feed neck on a ProMaster Can anyone say for certain that an Ion feed neck should not be used on a ProMaster? I have an Ion feedneck that I tried screwing onto my ProMaster, and it seems to be the same threads. However, I also know that there are feednecks made specifically for ICD markers (although not specifically the ProMaster). I've heard that putting an Ion feedneck on a ProMaster can result in the feedneck hole's threads being stripped. Does anyone have any first-hand experience with this problem? thanks, MCB. __________________ Everybody: Let's ease up on the red loctite, 'kay? Thanks. Feedback