Quote:
Originally Posted by secretweaponevan  How did you mount the 90* adapter to the feedneck? Someone on AO is asking this same question.
Thank you. |
Instead of using the warp upper adapter, (which I have seen pop off before) I made a small cut in the hose to fit it around the 90* adapter's input and used a hose clamp to make sure it does not come loose...ever.
The part of the hose 90* adapter that is supposed to clamp onto a powerfeed, I just dremeled off that way it was smooth, put it in the clamping feedneck and just clamped it down, with the clamp removed from the 90* adapter it is about 1" od which is fine for most feednecks that can clamp.
It is alot cheaper than a special feedneck, and this way removing the warp and hooking the halo on top is as simple as unclamping the adapter and then unscrewing the warp.
Quote:
Originally Posted by Garbageman705 That's my old Viking! |
You are quite correct, I got it off of Airassault but, it was your video on youtube of it that made me decide to get it. It has been treating me well.