Quote:
Originally Posted by Azzy  If you arent getting rollout problems, then you might mention to not touch the barrel.
Thats my 2 cents. |
With a springfeed, wouldn't a detent be a good idea? You might not have rollouts as a rock'n tilt, but with a spring forcing forcing them in there I'm worried about double feeding.
Quote:
Originally Posted by c6quad just as Schmitti said above, they should not have to desolder the entire tube to remove the portion they cut away.
you could also get them to side tap the valve and put a 90* elbow in there. you can keep the side tap plugged for 12 gram use and if you want to go CA, remove the plug and put in a quick disconnect fitting and run a remote. that would leave the gun very clean looking with out all the CA bracket crap. |
That's a great solution, invisible when you want it to be. I think I'll go with that, and get the bottom tube cut so the fast changer is flush with the front of the barrel.
Thanks guys!