Or I could just put no cap and leave the frame running. If you catch my drift
Nah, I really should test it at some point. I don't expect 4ms regardless however, it didn't even have that with the eBlade. But then again I set my mQs a little on the generous side as far as dwell, and use the pressure to adjust.
Now a caveat -- I am using rechargeable batteries, so that could possibly be helping me.
Quote:
|
but you said its not as smooth and louder with the higher dwell........YOU MUST PUT A CAP!!!! MUST!
|
Could be a false memory, or have to do with the feel of the frame itself. The Angel frame tolerances are a good deal looser than the eBlade, not to mention there is an extra point of contact between the trigger and the frame (trigger switch). I do miss the feel of the eBlade a bit.