mcarterbrown.com - View Single Post - sloonan's Tippmann SL68 Modified Stock Class Project (for Nelson Build Off)

sloonan · 05-09-2008, 06:37 PM

Here is the progress so far. It's only going to be modified stock class because of the auto trigger and I'm not sure how to change this.

Before:

1. Put on 12 gram changer, cut off the feedneck flush with the body.

2. Set up a homeade Hitman mod for the pump grip with a brass bracket and generous use of Plasti Dip.

3. Attach trigger shoe, sand the body, attach the horizontal feed with JB Weld (Sorry about the pics, they are from my phone)

4. Clean up and Plasti Dip pump grip (Sorry about the pics, they are from my phone)

5. Paint the body (3 coats automotive paint, 3 coats clear top coat) (Sorry about the pics, they are from my phone)

6. Put it all together. (Sorry about the pics, they are from my phone)

05-09-2008, 06:37 PM	#1 (permalink)
sloonan MCB Member Join Date: Jul 2006 Location: NJ	sloonan's Tippmann SL68 Modified Stock Class Project (for Nelson Build Off) Here is the progress so far. It's only going to be modified stock class because of the auto trigger and I'm not sure how to change this. Before: 1. Put on 12 gram changer, cut off the feedneck flush with the body. 2. Set up a homeade Hitman mod for the pump grip with a brass bracket and generous use of Plasti Dip. 3. Attach trigger shoe, sand the body, attach the horizontal feed with JB Weld (Sorry about the pics, they are from my phone) 4. Clean up and Plasti Dip pump grip (Sorry about the pics, they are from my phone) 5. Paint the body (3 coats automotive paint, 3 coats clear top coat) (Sorry about the pics, they are from my phone) 6. Put it all together. (Sorry about the pics, they are from my phone)