| A quick oring question...
Decided today to tear down the 'Mag and replace all the orings. Well, the power tube oring was in bad shape. In taking it apart, I decided to replace the oring on the power tube tip (the one that is used to keep the tip in place). In getting it off, I ended up cutting it and ruining it. It was then that I realized that I don't think I had to proper replacement!
The oring is larger than the power tube oring (unless it has stretched). I managed to get a power tube oring in place, but it doesn't feel right when I screw the tip on.
Anyone know if the power tube oring and the oring that fits at the base of the tip are the same?
At this point I don't believe that the oring I need is in the kit.
__________________
"A people that values its privileges above its principles soon loses both."
-- Dwight D. Eisenhower
"Associate with men of good quality if you esteem your own reputation; for it is better to be alone than in bad company."
-- George Washington View My Special Ops Brigade Page |