| Blazicane.
I had some elements of a possible trigger/mount solution mocked up.
you might as well go E-blazicane though.
The visual elements are not as attractive however and the stock becomes even weaker (assuming Kp stock) by the even more severe cutting required (IMHO, not tested in practice).
At this point I'd rather considering Hurcing a bare brass(as received for hot work later) MaddMatt Kp removable barrel KP clone, as really only the barrel option is desirable in the config element. The hurc can be worked both horizontal/hidden/faster 3 way anyway as is, so that becomes removed....all that's left is the hoses, and it would weigh less, important to some.
There are no nasty blazers, a body hack (likely require hoses), or a special body run/redesign of air paths ($$$ for a small run of bodies) would be required as I understand. |