Thread: Mag question
View Single Post
Old 10-10-2006, 09:23 AM   #4 (permalink)
MCB Member
DarkStar's Avatar
Join Date: Mar 2006

Fan of EMR
Brass N Wood Fan
In regards to performance there are 2 valve types: Classic & RT(including:E-Mag, X-Valve, Retro)

The classic Valve resets the on/off with the regulated air coming from the back end of the valve. The RT Series uses the incoming tank pressure to reset the On/Off.

The result is that the RT Series pushes harder to reset the gun than the clasic, and this effect is magnified the higher your source tank pressure. As you increase the tank pressure the force of the trigger return gets higher and higher. Eventually it pushes enough that you can get a bounce effect with the trigger where if you pull just right it will basically keep firing. This is more of a side effect than a desired design criterea, IIRC.

FeedBack FS: Triggers/Sears FS: Pumps

Originally Posted by Marauder_Pilot View Post
It will eventually get to the point where you're living in the back of a '78 Oldsmobile with a trunk full of the finest paintball gear known to man.
DarkStar is offline   Reply With Quote