View Single Post
Old 06-04-2008, 11:06 PM   #1 (permalink)
CCMachinist
MCB Member
 
Join Date: Oct 2007

CCM Fan
At last CCM centerfeed stock class feed

After all of these months maybe years we have finaly come up with a centerfeed stock class feed tube. Actually TF was the reason we came up with this idea. I was mod-ing his feed tube and I was looking for a die nut to cut the threads and it hit me. Man-Moment-Machine. There was two parts there and they fit together. The threads were the same. I couldn't believe it. It was within our grasp all of this time and we just didn't see it. Now it does have a few issues but with some brain storming we can make this work.I was thinking maybe cork screw design to solve the higth issue. Maybe some holes to see how many shots are left. Here is a thought. If the tube was 144" long you could get 211 .68 cal.balls in it.Talk about some A/T time. The sky is the limit on this one guys. Now I know you guys are chomping at the bit, but it still needs to be put into production.Any ideas would be welcome.
Oh,TF I was thinking of kicking you down some royalties on this.You can probably start thinking about retiring or at least cutting back you hours.
Anyway I guess you guys want to see some pics.Here you go.








__________________
Ecc. 9-10
Whatever your hand finds to do, do it with your might; for there is no work, nor device, nor knowledge, nor wisdom, in the grave, where you go.
CCMachinist is offline   Reply With Quote