| Watch it. It's quite common on my various cockers for the bolt to be a more snug fit passing through the back block than it is in the body. If you're checking this out then pull the bolt and the cocking rod out and swing the back block out of the way and try the bolt ONLY in the body. If you can tilt it about 20 to 25 degrees either way from level and the bolt slides in the bore you're golden. This is without the O rings in place and withe bore and bolt both "dry" as you can make it by wiping them down. No puddles of oil in other words.
__________________
Model airplanes are cool too!
|