mcarterbrown.com - View Single Post

Railgun · 10-31-2006, 11:20 PM

Excellent advice. I'm going to look into those springs. B, thanks for the warning but if they are the right wire size and turns diameter than I can cut them down and reform the cut end. Done it before. A touch fussy but it works.

DJ, that line setup looks nice. And shortly after I posted my pics I came across that same ASA to hose end like you have abotu 3/4 the page down at...
http://www.palmer-pursuit.com/catalog/fittings.htm

And the whole bottom line kit at....
https://palmer-pursuit.com/ecom/prod...b1ced5c970ebb4

This probably isn't news to many here but I only found PPS after some painful searching.

And I found angled bottom bottle ends at PMI. GOtta see if they sell parts over the net.

10-31-2006, 11:20 PM	#5 (permalink)
Railgun Post Whore Join Date: Oct 2006	Excellent advice. I'm going to look into those springs. B, thanks for the warning but if they are the right wire size and turns diameter than I can cut them down and reform the cut end. Done it before. A touch fussy but it works. DJ, that line setup looks nice. And shortly after I posted my pics I came across that same ASA to hose end like you have abotu 3/4 the page down at... http://www.palmer-pursuit.com/catalog/fittings.htm And the whole bottom line kit at.... https://palmer-pursuit.com/ecom/prod...b1ced5c970ebb4 This probably isn't news to many here but I only found PPS after some painful searching. And I found angled bottom bottle ends at PMI. GOtta see if they sell parts over the net. __________________ Model airplanes are cool too!