Quote:
Originally Posted by Venge  Got her all cleaned up,went to air her up and I got CO2 erupting from the asa.My first thought was o-ring,but upon inspection the o-ring seem fine.What I have noticed is a difference in threads on the tank that came with it,and the new 9oz thank I was trying to put on it. http://s07.picshome.com/c8a/pbh0035.jpg http://s07.picshome.com/c8a/pbh0036.jpg
Can I only use the tank that came with it?
Is something else my problem? |
I remember having similar issues with an SL-68 II I had a while back. The pin depressor in the ASA was a bit too long for any of the tanks I had and it would vent CO2 before the o-ring had a chance to seat. The easy solution is to drop a tank o-ring into the ASA. This should take up the difference and allow you to use the new tank. The more involve solution is to grind down the pin in the ASA, but if you grind it too much, you're kinda screwed. So, I'd suggest trying the o-ring trick first.
-Chad