View Single Post
Old 09-22-2008, 02:36 AM   #7 (permalink)
A.C. Basbas
Banned
 
Join Date: Feb 2007
Location: Amherst, Maynard, and Northampton Massachusetts.

As near as I can figure, you wouldn't need an A/T cut rod...

I'd approach it by having an eye or a pressure switch inside the pump handle itself, and hook it up like the eye on an eCocker. That way, you could set it to full auto, hold down the trigger, and pump away with it firing whenever the handle completes a full back-and-forth cycle... The board would need to be re-flashed, but still...

Awesomeness.
A.C. Basbas is offline   Reply With Quote