|
Sorry about the confusion for the second part:
Right now i have 2 sear, 1 with bushing that fit the sear pin perfectly, and one without bushing that does not fit the sear pin perfectly. But sear pin hole for the the second sear ( it came with the emag valve), seem to be bigger than the sear pin, but smaller than the bushing, so that the bushing from the other sear would not fit, yet at the same time the hole is too big for just the pin alone.
Do i need somekind of bushing that is smaller for the second sear pin?
The second sear pin is also about 1/8 of an inch longer than the first sear pin when comparing length.
thanks
|