|
Sorry i don't mean the sear pin, i mean the metal pin that goes into the mpa-3 that push on the sear. I was dry firing with it (without the sear in place), so the metal pin flew out. I think it's the equilvalent of the luke ram, but that part is now glued in, i just need to put back in the set crew for it, and move on to the next step.
This marker is sleepy pneu with an lpr inside, i'll take a picture of the internal when i finish assembling it, just need the screw for frame to the body which i don't have so i'll stop by home depot tomorrow.
|