View Single Post
Old 12-13-2006, 12:44 PM   #1 (permalink)
BE_Rogue
Active Member
 
BE_Rogue's Avatar
 
Join Date: Jul 2006
Location: central florida, Polk
Send a message via Yahoo to BE_Rogue

pgp non-cartridge valve chamber plug sleeve question

I have a leaky non-cartridge valve PGP. it was an abandoned semi-project.
It leaks several places, I've ordered a valve seal kit for it. I think this may fix a majority of leaks.

The thing that bothers me: I took it apart and it seems to be missing the chamber plug sleeve. Instead it had an o-ring similar to the one on the exhaust valve.
Can you replace the chamber plug sleeve with an O-ring ?
I imagine that if you could it would need to smaller than the one that was in there. (to fit inbetween the bigger sleeve/shelve and the chamber plug face. To fit in the same fashion as the original sleeve.)
Any advice is appreciated.
__________________
N.O.'M.A.A.M. #3
My Hungry Feedback Thread.
BE_Rogue is offline   Reply With Quote