Originally Posted by Dewane
Ive used this trick on my Ghosts over the years,it might work on other breach drop guns also.The front grip screw, screws into the barrel bore right about where a nice widgit would be useful.I have used a dab of JB weld,silicon or 5 minute epoxy to make a little bump on the tip of the grip screw,when screwed in, it sticks up into the barrel just enough to retain paint.You just have to play around with different sizes and compounds to find out what works best for you.
Thats an awesome idea.
With my grey spirit the grip screw comes out in the rear 50 percent of the breech where the feed tube drops the paint. The longer bolt and forward mounted feedtube make that gauge of measurement no good.
Still an awesome idea, i guess il have to buy a ghost to try it :P