|
Iconic Muffinman,
I am confused with your question. Are you asking if you can connect an SCUBA tank, as in the large 20~50lbs tanks that people use to go SCUBA diving to your ATS-10 or are you asking if you can use a SCUBA tank to fill an HPA tank that is used to power the ATS-10? All modern ATS guns are powered from the standard output pressure of 850~900PSI out of standard Paintball HPA tanks. If your SCUBA tank has a higher output pressure than 850~900PSI then chances are the ATS-10 will work once, then all the seals go from the extra pressure. If you can get a regulator to set the output pressure from the large SUCBA tank to the 850~900 PSI range and fittings to go from the SUCBA tank to the ASA of the ATS-10 then there is no reason it should not work. I do not know of any paintball field that would let a player run out and around with a SCUBA tank on their back.
I have several ATS guns, they are pretty efficient. I get over a thousand shots with my 4500/68CU tank.
|