|
It does make a difference, but like said above, if you can get a cheap E/C, it will most likely be better. The real advantage of the internal E/C is you get to keep the VM stock looking, without the negative of 100 shots/7oz
Later model VMs actually came with the mod from the factory. They must have seen some come in for repair, and thought "Hey, thats not a bad idea".
In generally, lots of smaller holes are better then a single large hole since it creates larger surface area for ambiet heat transfer. But in reality, its a bit tough to get in there with a drill press, and other tools, so just do whatever you can do, and pay close attention to the bounderies of the gun.
__________________ www.montneel.com "the evidence strongly suggests that neither Billy nor Adam (Smart Parts) could have invented the electronic paintgun" -Garr M. King, U.S. Judge |