|
Thanks a lot railgun! thats basicly what i needed to hear!
I got the thinking after reading that, what if i took a standard HPA tank regulator, and screwed it into my gun, capped off the thread that would go into the actual HPA tank (since there will be no tank attached to it), and ran a ninja fill whip from my tank into the regulator's fill ASA, thus making a kink-less high pressure hose, like the whip is designed to be? It seems a little safer to use the plumbing on the existing tank without trying to modify it, 3000psi is dangerous stuff.
And i am using a 30cu ft pony bottle, it weighs about 25lbs full, and i just wear it on my shallow water back plate, you barely know its there if you dont think about it.
|