mcarterbrown.com - View Single Post

sdawg · 05-22-2009, 11:55 AM

UPDATE:

Frame is pending, keeping the rest for a reliable mech semi.

****

I've had this project pneumag that I've been building for a while. My curiousity about pneumags has been abated, and I have been using my Outkast Sniper so much that I don't have interest into holding onto a semi-auto that I will rarely use. However, I'm not in a hurry to sell either.

Specs:

- Intelliframe with pneumatic trigger by sandfreestyle at automags.org. I added a spring to return the trigger.
- DarkSeoul smoke grips
- Automag classic valve, unmatched serial numbers, with level 7 foamie bolt.
- R/T on-off to reduce LPR pressure
- Tac-One rail
- ULE body
- XSV feedneck
- CP detent
- ANS Flip-lever on-off (knock-off of the DP on-off, but does *not* bleed the lines)
- WGP LPR (dust black, I think it is from a pro-stock)
- Shocktech gas-through foregrip

Last time I took it to the field, it was able to shoot, but not as fast as the pneumag aficionados have claimed. Also, it is a level 7 valve, so you are going to need to have a force-feed loader.

Disclosure:

I have drilled:

on the bottom of the frame and the ANS rail so that the LPR hose to the switch is not crimped. The drilling is not visible when the marker is assembled.
at the top right of the right grip panel, so that it fits over the screw that holds the piston in the frame.
on the inside of the tac-one rail, in an attempt to make the vertical ASA mount in line with the rail (notice the vert ASA is not being used to route air because it is at an angle on the rail). I gave up, so there is no hole, but I feel that I should mention it.

Extras I will include:

- automag spacer kit with extra power-tube o-rings.
- stock ULE detent (used) and extra CP detent (new)
- stock ULE feedneck
- classic valve on/off assembly
- various spare parts, including and extra foamie

Some Guidelines:

- As mentioned above, NO PARTOUTS
- Paypal or Money Order
- I won't ship Internationally.
- Price does not include shipping.

Trades:

- BNIB Rotor
- BNIB Dye i3 or i4 Pros
- CCM Deluxe Pump kit to replace my Snipers stock WGP pump kit
- A high-end gun
- interesting paintball stuff

What I don't want:
- your random junk. I have enough of my own, believe me.

Thanks MCB!

05-22-2009, 11:55 AM	#1 (permalink)
sdawg MCB Member Join Date: Dec 2006 Location: Texas	Pneumag UPDATE: Frame is pending, keeping the rest for a reliable mech semi. ** I've had this project pneumag that I've been building for a while. My curiousity about pneumags has been abated, and I have been using my Outkast Sniper so much that I don't have interest into holding onto a semi-auto that I will rarely use. However, I'm not in a hurry to sell either. Specs:** - Intelliframe with pneumatic trigger by sandfreestyle at automags.org. I added a spring to return the trigger. - DarkSeoul smoke grips - Automag classic valve, unmatched serial numbers, with level 7 foamie bolt. - R/T on-off to reduce LPR pressure - Tac-One rail - ULE body - XSV feedneck - CP detent - ANS Flip-lever on-off (knock-off of the DP on-off, but does not bleed the lines) - WGP LPR (dust black, I think it is from a pro-stock) - Shocktech gas-through foregrip Last time I took it to the field, it was able to shoot, but not as fast as the pneumag aficionados have claimed. Also, it is a level 7 valve, so you are going to need to have a force-feed loader. Disclosure: I have drilled: on the bottom of the frame and the ANS rail so that the LPR hose to the switch is not crimped. The drilling is not visible when the marker is assembled. at the top right of the right grip panel, so that it fits over the screw that holds the piston in the frame. on the inside of the tac-one rail, in an attempt to make the vertical ASA mount in line with the rail (notice the vert ASA is not being used to route air because it is at an angle on the rail). I gave up, so there is no hole, but I feel that I should mention it. Extras I will include: - automag spacer kit with extra power-tube o-rings. - stock ULE detent (used) and extra CP detent (new) - stock ULE feedneck - classic valve on/off assembly - various spare parts, including and extra foamie Some Guidelines: - As mentioned above, NO PARTOUTS - Paypal or Money Order - I won't ship Internationally. - Price does not include shipping. Trades: - BNIB Rotor - BNIB Dye i3 or i4 Pros - CCM Deluxe Pump kit to replace my Snipers stock WGP pump kit - A high-end gun - interesting paintball stuff What I don't want: - your random junk. I have enough of my own, believe me. Thanks MCB! __________________ Everybody: Let's ease up on the red loctite, 'kay? Thanks. MCB Feedback Last edited by sdawg; 01-29-2010 at 01:23 PM.