mcarterbrown.com - View Single Post

Warwitch · 08-20-2009, 08:14 PM

All done baby!!!

Crikey with all the Dremel work. This is not a task Ill be undertaking again anytime soon.

Mounting the board and having access to it was irritating me. So I cut the back off of the Reloader B and made a nice little removable housing for it. Its held on with industrial velcro, plugs right in through the back.

Unit holds 175!! Way more than I though Id get so Im really stoked. The thing work flawlessly. Dumped a full hopper with no skips, breaks or jams.

The interior (this was during mock up stuff is nice and tight now.)

Rigged up:

Still going to clean up the "welds" and dings but its ready to rock. Ill try to get some video the next time we go play.

Edit: current setup

08-20-2009, 08:14 PM	#1 (permalink)
Warwitch Post Whore Join Date: Nov 2007 Location: Not of this Earth	Box magazine project: Complete!! All done baby!!! Crikey with all the Dremel work. This is not a task Ill be undertaking again anytime soon. Mounting the board and having access to it was irritating me. So I cut the back off of the Reloader B and made a nice little removable housing for it. Its held on with industrial velcro, plugs right in through the back. Unit holds 175!! Way more than I though Id get so Im really stoked. The thing work flawlessly. Dumped a full hopper with no skips, breaks or jams. The interior (this was during mock up stuff is nice and tight now.) Rigged up: Still going to clean up the "welds" and dings but its ready to rock. Ill try to get some video the next time we go play. Edit: current setup __________________ Arkanjel Imaging - My Flickr photostream Last edited by Warwitch; 09-28-2009 at 09:17 PM.