Trigger discussion - Page 2

Robertsr · 02-02-2007, 08:14 AM

Nope, not supposed to do that. I suspect that something may be amiss with your safety...

doicomehereoften · 02-02-2007, 07:37 PM

Or the trigger pin may be threaded out too far. AGD's tech manuals usually say that when gassed up, the trigger pin should be ~1/16" from the trigger when it's all the way forward (stick a 1/16" allen wrench in there to check), and when the trigger is pulled, the trigger should stop ~1/16" from the back of the frame.

Rudisill · 02-02-2007, 09:32 PM

If the trigger rod was out too far then he'd most likely have some serious issues. Probably just the safety...

HurtCow · 02-02-2007, 10:50 PM

I have my Benchmark frame set up the same way on my RT, firing w/ the safety on. Works great for me. Very short trigger pull and just about eliminates short-stroking.

doicomehereoften · 02-02-2007, 10:53 PM

So is there no "slack" or "take-up" before you get resistance from pulling the trigger?

HurtCow · 02-02-2007, 10:58 PM

A tiny bit. I have slightly less than 1/16" gap between the rod and trigger.

02-02-2007, 08:14 AM	#11 (permalink)
Robertsr Ultimate Battle Monkey Z Join Date: Apr 2006 Location: Waynesboro, VA Posts: 3,280	Nope, not supposed to do that. I suspect that something may be amiss with your safety... __________________ Geriatrically Assured Destruction

02-02-2007, 07:37 PM	#12 (permalink)
doicomehereoften Rec Poster Join Date: Jan 2007 Location: Greeley, CO Posts: 95	Or the trigger pin may be threaded out too far. AGD's tech manuals usually say that when gassed up, the trigger pin should be ~1/16" from the trigger when it's all the way forward (stick a 1/16" allen wrench in there to check), and when the trigger is pulled, the trigger should stop ~1/16" from the back of the frame. __________________ I'm really not good at writing signatures. I mean, what is it that you're really trying to do? Write something that somebody's actually going to remember, or even read? Yeah right! Nobody ever actually reads these things.

02-02-2007, 10:53 PM	#15 (permalink)
doicomehereoften Rec Poster Join Date: Jan 2007 Location: Greeley, CO Posts: 95	So is there no "slack" or "take-up" before you get resistance from pulling the trigger? __________________ I'm really not good at writing signatures. I mean, what is it that you're really trying to do? Write something that somebody's actually going to remember, or even read? Yeah right! Nobody ever actually reads these things.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

02-02-2007, 09:32 PM	#13 (permalink)
Rudisill Active Member Join Date: Oct 2006 Posts: 290	If the trigger rod was out too far then he'd most likely have some serious issues. Probably just the safety...