Paintball

[Jordan]

Is there enough meat on a rail to have a pocket milled, large enough to hold a small board? I'm tossing around an idea for an E-pneumag conversion.

My other question is whether or not a non-AGD frame can be used on a Classic rail - and do I need the field-strip screw? Or can I use an appropriate stainless screw?

And what's the width of the actuator?

I'm thinking about using a BKO frame and electronics to make a E-pneumag, but I don't have all the parts in front of me to check - namely a Mag.

[pillage]

Originally Posted by Jordan

Is there enough meat on a rail to have a pocket milled, large enough to hold a small board? I'm tossing around an idea for an E-pneumag conversion.

My other question is whether or not a non-AGD frame can be used on a Classic rail - and do I need the field-strip screw? Or can I use an appropriate stainless screw?

Why do you need a small board for the Pneumag conversion? Eyes? The Venomous Designs railshttp://bigevilonline.com/showthread.php?t=2046 are already milled inside if you want to make a sleeper Pneumag with no exposed hoses. You can always just use a screw in place of the field strip screw.

Here is a couple of good how to`s.
How To Pneumag Guide And Info... - BigEvil Online
Emancipator "How-To" - BigEvil Online

[Jordan]

I'm making a electro version of a pneumag, using BKO guts (board, solenoid, etc).... if I can fit the board somewhere.

Thanks for the links.

[oldskoolkillz]

like this...... B2k frame with delrin Trigger by Oldskoolkillz on MAG. (sold body board and eyes) Plenty of room for a small board.

[minimag03]

Here's a pic. It's around a 3/4 inch deep as well.

[Jordan]

Originally Posted by oldskoolkillz

like this......http://i275.photobucket.com/albums/j...1265502844.jpg B2k frame with delrin Trigger by Oldskoolkillz on MAG. (sold body board and eyes) Plenty of room for a small board.

I know - like I said, I've got a BKO, so I know there's room in the frame, just not enough to put the board and the battery and solenoid and everything else.

Originally Posted by minimag03

Here's a pic. It's around a 3/4 inch deep as well.

http://i11.photobucket.com/albums/a1...3/IMG_2433.jpg

Looks like there won't be enough room for the board.

Back to the drawing board, then!

[secretweaponevan]

Check out the UTB. It's tiny.

[hellbatman]

Standard BKO board? I think they would be a tad big to stuff into a classic rail. The VaporWorks Chaos board on the other hand...

-curtis

[Jordan]

Originally Posted by secretweaponevan

Check out the UTB. It's tiny.
http://www.scenariodreams.com/images/univ_batt.jpg

I'm thinking about that right now too, but if I can use what I have just to prove the concept to myself....I can always run the 9V outside the grip a la Rainmaker.

Originally Posted by hellbatman

Standard BKO board? I think they would be a tad big to stuff into a classic rail. The VaporWorks Chaos board on the other hand...

-curtis

If VW was still operational, maybe.... except the price alone is worth as much as the Mag would be, and I'm trying to do this on a bit of a budget.

Thanks for the tips, guys.

One other question - what kind of pressure do you think is needed to trip the sear? I'm looking at a really small solenoid on ASP's site, but it maxes at just over 70 psi, and I'm thinking that's not going to be enough for the actuator.

[Jaan]

Another idea is to make a new rail to your liking to fit everything you need into it or to it.