want to back bottle my e mag

M600 · 08-16-2010, 06:20 PM

as above can i do it on the e mag rail? i have the right tapping tools etc
if not will a classic rail work on an e mag?
also how much do e mag rails go for on their own
thanks much

minimag03 · 08-16-2010, 11:43 PM

The rail wont need to be tapped if you are using an AGD back bottle. You just need to drilled a couple holes in the rail and you're done. I dunno how much emag rails go for but nothing outrageous.

Zondo · 08-17-2010, 08:01 PM

I wouldn't switch to a classic rail. The sear attaches differently so you may end up with problems right there (sear arm length, on/off pin length, etc.).

Ando · 08-17-2010, 08:12 PM

Quote:

Originally Posted by Zondo

I wouldn't switch to a classic rail. The sear attaches differently so you may end up with problems right there (sear arm length, on/off pin length, etc.).

Zondo · 08-17-2010, 08:24 PM

Emag vs Classic sear...

I said "may" because I've never tried it or known of anyone to have tried it, so I'm theorizing.

Sheesh...

EDIT: Although I guess it's a matter of the rail as opposed to the sear itself in how it mounts.

M600 · 08-18-2010, 08:23 AM

well i guess ill see thanks guys

Spider! · 08-18-2010, 09:37 AM

With the tapered tail of an emag rail, a standard AGD bba will point (mostly) straight back. Is that what you're after?

BigEvil · 08-18-2010, 09:42 AM

Get your hands on any one of the Venomous Designs rails. There is an accessory slot in the back for just such a thing. All you need to do is bolt the asa right on.

Zondo · 08-18-2010, 03:24 PM

Quote:

Originally Posted by BigEvil

Get your hands on any one of the Venomous Designs rails. There is an accessory slot in the back for just such a thing. All you need to do is bolt the asa right on.

I also just happen to have one for sale

BigEvil · 08-18-2010, 04:37 PM

Quote:

Originally Posted by Zondo

I also just happen to have one for sale

Well now, that works out just fine doesnt it?

08-16-2010, 06:20 PM	#1 (permalink)
M600 Phd tramp Join Date: Sep 2008 Location: London/Nottingham UK	want to back bottle my e mag as above can i do it on the e mag rail? i have the right tapping tools etc if not will a classic rail work on an e mag? also how much do e mag rails go for on their own thanks much __________________ My feedback: http://www.mcarterbrown.com/forums/f...ml#post1349025

08-16-2010, 11:43 PM	#2 (permalink)
minimag03 WVU paintball #19 Join Date: Aug 2006 Location: Morgantown, WV	The rail wont need to be tapped if you are using an AGD back bottle. You just need to drilled a couple holes in the rail and you're done. I dunno how much emag rails go for but nothing outrageous. __________________ Feeback Gallery

08-17-2010, 08:01 PM	#3 (permalink)
Zondo Closer to home..... Join Date: Dec 2008	I wouldn't switch to a classic rail. The sear attaches differently so you may end up with problems right there (sear arm length, on/off pin length, etc.). __________________ My Feedback: Here on MCB BigEvilOnline Automags.org PaintBallNation

08-17-2010, 08:24 PM	#5 (permalink)
Zondo Closer to home..... Join Date: Dec 2008	Emag vs Classic sear... I said "may" because I've never tried it or known of anyone to have tried it, so I'm theorizing. Sheesh... EDIT: Although I guess it's a matter of the rail as opposed to the sear itself in how it mounts. __________________ My Feedback: Here on MCB BigEvilOnline Automags.org PaintBallNation Last edited by Zondo; 08-17-2010 at 08:35 PM.

08-18-2010, 08:23 AM	#6 (permalink)
M600 Phd tramp Join Date: Sep 2008 Location: London/Nottingham UK	well i guess ill see thanks guys __________________ My feedback: http://www.mcarterbrown.com/forums/f...ml#post1349025

08-18-2010, 09:37 AM	#7 (permalink)
Spider! MCB Member Join Date: Dec 2008 Location: Houston, TX	With the tapered tail of an emag rail, a standard AGD bba will point (mostly) straight back. Is that what you're after? __________________ My Feedback

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search