intelli pneumag

wins mag · 08-07-2011, 07:08 PM

I want to build a pneumag frame from an intelliframe for a ult valve I am wondering what the best switch and actuator would be also i want to set it up on the gun my self but was wondering if their was someone who does the machine work to fit and mount the parts I want a pro looking job

secretweaponevan · 08-07-2011, 10:29 PM

Check the sticky.

shawnhaskel · 09-19-2011, 06:21 PM

Check out lukescustoms.com he does alot of mag specific milling.

shawnhaskel · 09-20-2011, 04:01 PM

I am talking with mag79 know about getting a kit to do myself once my frame and rail return from lukescustoms. He ll be able to help you.

wins mag · 09-20-2011, 07:33 PM

Did it my self it wasn't hard there is so much room in the intelliframe. I just need to find a small 10-32 90 degree air fitting any Ideas?

secretweaponevan · 09-21-2011, 04:59 PM

ASP Online Store: Fittings and hose

need4reebs · 10-06-2011, 01:50 AM

also look up Loguzzzz on AO, he goes by practice target here as well! he does awesome work...truthfully anyone doing Mag mods is pretty much a perfectionist so its up to you man!!!

flood152 · 10-07-2011, 02:49 PM

Quote:

Originally Posted by wins mag

Did it my self it wasn't hard there is so much room in the intelliframe. I just need to find a small 10-32 90 degree air fitting any Ideas?

http://palmer-pursuit.com

08-07-2011, 07:08 PM	#1 (permalink)
wins mag MCB Member Join Date: Dec 2010	intelli pneumag I want to build a pneumag frame from an intelliframe for a ult valve I am wondering what the best switch and actuator would be also i want to set it up on the gun my self but was wondering if their was someone who does the machine work to fit and mount the parts I want a pro looking job

08-07-2011, 10:29 PM	#2 (permalink)
secretweaponevan Marathoner Join Date: Aug 2007 Location: Pocono Lake, PA	Check the sticky. __________________ "You don't use science to show that you're right, you use science to become right." -xkcd 701 feedback

09-21-2011, 04:59 PM	#6 (permalink)
secretweaponevan Marathoner Join Date: Aug 2007 Location: Pocono Lake, PA	ASP Online Store: Fittings and hose __________________ "You don't use science to show that you're right, you use science to become right." -xkcd 701 feedback

10-06-2011, 01:50 AM	#7 (permalink)
need4reebs Possible Gun Whore Join Date: Aug 2010 Location: Phx, AZ	also look up Loguzzzz on AO, he goes by practice target here as well! he does awesome work...truthfully anyone doing Mag mods is pretty much a perfectionist so its up to you man!!! __________________ http://www.mcarterbrown.com/forums/f...-feedback.html http://fightertownpaintballpark.com/

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

09-19-2011, 06:21 PM	#3 (permalink)
shawnhaskel Active Member Join Date: May 2011	Check out lukescustoms.com he does alot of mag specific milling.

09-20-2011, 04:01 PM	#4 (permalink)
shawnhaskel Active Member Join Date: May 2011	I am talking with mag79 know about getting a kit to do myself once my frame and rail return from lukescustoms. He ll be able to help you.

09-20-2011, 07:33 PM	#5 (permalink)
wins mag MCB Member Join Date: Dec 2010	Did it my self it wasn't hard there is so much room in the intelliframe. I just need to find a small 10-32 90 degree air fitting any Ideas?