2K9 Micromag SS washer

ROAD DOG 33 · 10-19-2011, 01:59 AM

I have been putting together a 2K9 micromag and purchased a bunch of parts from agd to rebuild the valve. Along with the parts I ordered an SS washer in hopes that it would fit the body, but its too small. The AGD ss washer OD is too small for the 2K9 micromag.

Has anyone been able to source an SS washer for a 2K9 Micromag?

Ando · 10-19-2011, 07:46 AM

Just go shopping at a hardware store

ROAD DOG 33 · 11-08-2011, 03:03 AM

I am trying to get a couple people together to get some custom stainless washers for this purpose over on AO, chech the dealers section under "Introducing the 2009 Micromag". Details can be found there.

Robertsr · 11-08-2011, 02:32 PM

Quote:

Originally Posted by Ando

Just go shopping at a hardware store

Nothing in there the right size.

Trust me. I took my body and bolt into the store.

splashkitsrock420 · 11-09-2011, 12:54 PM

anyone found one yet?

C_losjoker · 11-09-2011, 01:04 PM

Quote:

Originally Posted by splashkitsrock420

anyone found one yet?

check over on AO the dealers threat mentioned above we are trying to get an order going.

IrishRedneck86 · 11-09-2011, 04:44 PM

I found a steel washer to fit the body but I gotta bore out the center a little for the bolt I'll get back to ya on the size or if I can get it to work really well do a run of them for people

Ando · 11-10-2011, 08:41 AM

We have a hyd punch and large sheets of Ti. I'll see if we have the proper dies on Saturday and i'll get back with you guys.

Robertsr · 11-10-2011, 09:50 AM

That would be cool. The closest thing I've found would still move around a bit in the chamber, and I'd much rather it was snug.

Ando · 11-10-2011, 07:40 PM

Someone get me exact measurements.

10-19-2011, 01:59 AM	#1 (permalink)
ROAD DOG 33 Active Member Join Date: Oct 2010	2K9 Micromag SS washer I have been putting together a 2K9 micromag and purchased a bunch of parts from agd to rebuild the valve. Along with the parts I ordered an SS washer in hopes that it would fit the body, but its too small. The AGD ss washer OD is too small for the 2K9 micromag. Has anyone been able to source an SS washer for a 2K9 Micromag?

10-19-2011, 07:46 AM	#2 (permalink)
Ando Formerly known as DMex Join Date: Jul 2009 Location: Glen Burnie, MD.	Just go shopping at a hardware store __________________ WTB NOXX Tac1 Springfeed and Javelin Twister Barrel...PM Me!!!

11-09-2011, 04:44 PM	#7 (permalink)
IrishRedneck86 Active Member Join Date: Oct 2008	I found a steel washer to fit the body but I gotta bore out the center a little for the bolt I'll get back to ya on the size or if I can get it to work really well do a run of them for people __________________ WHY GIRLS SHOULD DATE A PB PLAYER: 1.WE KNOW HOW TO GET DOWN AND DIRTY. 2.WE ALWAYS WEAR PROTECTION. 3.WE HAVE AT LEAST A 14 INCH BARREL. 4.WE FIRE OFF HUNDREDS OF ROUNDS WITHOUT GETTING TIRED. 5.WE KNOW HOW TO FOLLOW INSTRUCTIONS. 6.WE CAN FIT INTO TIGHT SPOTS. 7.WE LOVE TO BE AGGRESSIVE. 8.WE NEVER FORGET TO LUBE OUR PRODUCTS. 9.MONEY IS NO LIMIT. 10. A CONDOM IS A MUST

11-10-2011, 08:41 AM	#8 (permalink)
Ando Formerly known as DMex Join Date: Jul 2009 Location: Glen Burnie, MD.	We have a hyd punch and large sheets of Ti. I'll see if we have the proper dies on Saturday and i'll get back with you guys. __________________ WTB NOXX Tac1 Springfeed and Javelin Twister Barrel...PM Me!!!

11-10-2011, 09:50 AM	#9 (permalink)
Robertsr King of the OFG Join Date: Apr 2006 Location: Waynesboro, VA	That would be cool. The closest thing I've found would still move around a bit in the chamber, and I'd much rather it was snug. __________________ MicroMags 'R Us

11-08-2011, 03:03 AM	#3 (permalink)
ROAD DOG 33 Active Member Join Date: Oct 2010	I am trying to get a couple people together to get some custom stainless washers for this purpose over on AO, chech the dealers section under "Introducing the 2009 Micromag". Details can be found there.

11-09-2011, 12:54 PM	#5 (permalink)
splashkitsrock420 Post Whore Join Date: Jul 2007 Location: louisville ky --502---	anyone found one yet?

11-10-2011, 07:40 PM	#10 (permalink)
Ando Formerly known as DMex Join Date: Jul 2009 Location: Glen Burnie, MD.	Someone get me exact measurements. __________________ WTB NOXX Tac1 Springfeed and Javelin Twister Barrel...PM Me!!!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search