My project 'Mag...foregrip help needed.

JKR · 01-15-2012, 08:35 PM

Purchased another Classic Automag a while back. I decided today was a good day to strip it down and clean it and take some of the parts I had acquired and put them on to get the project started.

It came with some gas thru grip that I took off and put aside. Had a KAPP foregrip extender that I put on the rail and put the ASA on as shown. It came with a left feed PF body, took it off and put on the Minimag body I intend on using for it (will be Cerekoted OD green). Also planning on adding a LAPCO T-stock/drop.

I want a foregrip but there aren't many choices besides the AGD bike grip that can be used with an ASA in place. Any others out there I might be missing or have forgotten about? Prefer a grip (folding would be nice) over an expansion chamber or gas thru.

Here is a picture of the start of the project...

Jkoselka · 01-15-2012, 08:39 PM

Hmm, none that I know of. If it were me I would just mill the extender to accept a picatinny mount (dovetail) and then you could get a folding forgrip that you want. Contact AOLuke, he might be able to help you out.

luke-AO · 01-15-2012, 09:21 PM

Going to be doing a run of forgrips>
Automags.Org Online Forums - Gauging interest in AM and RTP mount foregrips

Automag mount>

Two 10-32 screw mount>

Both would come with Lukes Customs milled in the side along with some kind of "side milling".
Both are gas-through.

....A...........B.........C........D

Any style $65

JKR · 01-15-2012, 09:28 PM

Nice!

luke-AO · 01-15-2012, 10:15 PM

I have a few of these left >>

And a few foregrip extenders, 15* forward, reverse, straight long and short. >
AM/MM Foregrip Extenders.html
I have a few out of stock but just got materials in to do another run.

Not exactly what you wanted but a few more choices...

sQuidvision · 01-15-2012, 10:30 PM

how crafty are you? i took an ASA from an a5 and a gutted reg to make this one:

And a no-name bolt on grip for this one:

01-15-2012, 08:35 PM	#1 (permalink)
JKR AKA: Wraith Join Date: Apr 2006 Location: WV	My project 'Mag...foregrip help needed. Purchased another Classic Automag a while back. I decided today was a good day to strip it down and clean it and take some of the parts I had acquired and put them on to get the project started. It came with some gas thru grip that I took off and put aside. Had a KAPP foregrip extender that I put on the rail and put the ASA on as shown. It came with a left feed PF body, took it off and put on the Minimag body I intend on using for it (will be Cerekoted OD green). Also planning on adding a LAPCO T-stock/drop. I want a foregrip but there aren't many choices besides the AGD bike grip that can be used with an ASA in place. Any others out there I might be missing or have forgotten about? Prefer a grip (folding would be nice) over an expansion chamber or gas thru. Here is a picture of the start of the project... __________________ "A people that values its privileges above its principles soon loses both." -- Dwight D. Eisenhower "Associate with men of good quality if you esteem your own reputation; for it is better to be alone than in bad company." -- George Washington JAN 20, 2013 View My Special Ops Brigade Page Feedback

01-15-2012, 08:39 PM	#2 (permalink)
Jkoselka Seriously I am really old Join Date: Jul 2010 Location: Gilbert, AZ	Hmm, none that I know of. If it were me I would just mill the extender to accept a picatinny mount (dovetail) and then you could get a folding forgrip that you want. Contact AOLuke, he might be able to help you out. __________________ "I swear this is the last one.............." Offically old when: You come off the field, run into an old High School girlfriend and find out it was her teenage kid that shot you out. America is all about speed. Hot, nasty, bada$$ speed. -Eleanor Roosevelt, 1936 Ebay Feedback MCB Feedback

01-15-2012, 09:21 PM	#3 (permalink)
luke-AO lukescustoms.com Join Date: Aug 2009 Location: Cottonwood AZ	Going to be doing a run of forgrips> Automags.Org Online Forums - Gauging interest in AM and RTP mount foregrips Automag mount> Two 10-32 screw mount> Both would come with Lukes Customs milled in the side along with some kind of "side milling". Both are gas-through. ....A...........B.........C........D Any style $65 __________________ My Feedback

01-15-2012, 09:28 PM	#4 (permalink)
JKR AKA: Wraith Join Date: Apr 2006 Location: WV	Nice! __________________ "A people that values its privileges above its principles soon loses both." -- Dwight D. Eisenhower "Associate with men of good quality if you esteem your own reputation; for it is better to be alone than in bad company." -- George Washington JAN 20, 2013 View My Special Ops Brigade Page Feedback

01-15-2012, 10:15 PM	#5 (permalink)
luke-AO lukescustoms.com Join Date: Aug 2009 Location: Cottonwood AZ	I have a few of these left >> And a few foregrip extenders, 15* forward, reverse, straight long and short. > AM/MM Foregrip Extenders.html I have a few out of stock but just got materials in to do another run. Not exactly what you wanted but a few more choices... __________________ My Feedback

01-15-2012, 10:30 PM	#6 (permalink)
sQuidvision Seasoned Member Join Date: Oct 2010	how crafty are you? i took an ASA from an a5 and a gutted reg to make this one: And a no-name bolt on grip for this one: __________________ sQuid's Feedback

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search