| ||Thread Tools||Search this Thread|
|04-22-2012, 02:14 PM||#1 (permalink)|
Join Date: Jun 2010
AGD parts appraisal
Hey guys I'm just getting into mags so I just want to double check what the going market rate is. Selling a buch of spare parts to raise some $$ for supergame, here is what I have
1 - AGD level 10 kit
I think it’s a complete kit but not sure, comes with the bolt, powertube tip, a couple shims, complete carrier set, 2 foamies (1 installed), and intructions.
2 - AGD Automag valve
Matching numbers, upgraded with an RT on/off with shims, a couple powertube spacers, and a bunch of o-rings from a maintenance kit
3 - AGD ULT
ULT on/off with about 7 shims and an extra oring
Also I am torn because I have a spare Tac-one body and ygrip, should I just save this stuff and make a Tac-One with a 12 gram grip to use as a back up or with CO2? Thanks for your help
Last edited by grub; 04-22-2012 at 02:18 PM.
|04-22-2012, 03:37 PM||#2 (permalink)|
Join Date: Jan 2008
That's some nice stuff you have there. I wish I could help you out, but I don't really have a good grasp of the market for Mag parts. I will tell you I just gave something around $30 for a new RT on/off.
|04-22-2012, 03:48 PM||#3 (permalink)|
Join Date: Oct 2009
Location: Manch Vegas, NH
I would guess:
$50-$60 for the Level 10.
$35-$50 for the valve depending on condition and the RT on/off would put you on the higher end, spring would be nice if you had one.
$30 for the ULT.
|04-22-2012, 04:51 PM||#4 (permalink)|
Join Date: Dec 2008
Location: Houston, TX
|Thread Tools||Search this Thread|