mcarterbrown.com  

Reply
 
Thread Tools Search this Thread
Old 05-07-2012, 07:12 PM   #1 (permalink)
Post Whore
 
henchman's Avatar
 
Join Date: Jan 2010

PTP 2k9 issue

So, I just got off the phone with AGD, and it seems that my 2k9 is not made correctly.
Even with the metal ring nt installed, the valve is too far back to tune properly. Anything over about 200-220, it starts venting air out the back because it needs to be turned up way too much. The same valve then transferred to a tac me shoots at 340 or so.

Anybody else had this problem with a PTP 2k9?
henchman is offline   Reply With Quote
Old 05-07-2012, 11:24 PM   #2 (permalink)
King of the OFG
 
Robertsr's Avatar
 
Join Date: Apr 2006
Location: Waynesboro, VA
Send a message via MSN to Robertsr

Kilt Fan
Nope. Can you put the ring in backwards? That would shave like an eighth of an inch off the valve depth...
__________________
MicroMags 'R Us

FEEDBACK
Robertsr is offline   Reply With Quote
Old 05-07-2012, 11:31 PM   #3 (permalink)
Paintball Fox
 
BenoitOWN's Avatar
 
Join Date: Oct 2006
Location: Canada, QC

Fan of EMR
CCM Fan
My problem is with the ring installed and the X-valve screwed the whole thing looks way too tight in there.

Now it to adjust my ram(Tryed Q.e.v, didn't have enoufh force to work the sear.
__________________
Currently a dealer for: Ninja Paintball
Distributor from: PaintballGear / Ansgear
Feedback
Was sponsored by(2010):
Point Of View Cameras - For your helmet camera needs
BenoitOWN is offline   Reply With Quote
Old 05-08-2012, 12:22 AM   #4 (permalink)
Post Whore
 
henchman's Avatar
 
Join Date: Jan 2010

Quote:
Originally Posted by Robertsr View Post
Nope. Can you put the ring in backwards? That would shave like an eighth of an inch off the valve depth...
You could if you wanted to. But according tomdave at AGD, the issue is its not going in far enough.
henchman is offline   Reply With Quote
Old 05-08-2012, 12:25 AM   #5 (permalink)
King of the OFG
 
Robertsr's Avatar
 
Join Date: Apr 2006
Location: Waynesboro, VA
Send a message via MSN to Robertsr

Kilt Fan
Oh, I see. That's a bummer. Both of mine fire fine and I don't have any trouble with velocity.
__________________
MicroMags 'R Us

FEEDBACK
Robertsr is offline   Reply With Quote
Old 05-08-2012, 08:48 AM   #6 (permalink)
Active Member
 
Join Date: Aug 2009
Location: Sanford, FL

I have trouble with velocity, I can't get it over 220 or so. The same valve shoots fine on an ULE body. I also have the ring installed, but I was already having that problem before the ring. Valve too far back you say? Did he have you measure something?

My lvl10 engages every 5 shots or so while dry firing, I think in my case it is catching on either the ring or the body itself. Do you have lvl10?

I wonder if our problems are related or not. I have read on AO of someone needing to dry fire a few tanks before it would get decent velocity.
Doubledutch is offline   Reply With Quote
Old 05-08-2012, 09:25 AM   #7 (permalink)
MCB Member
 
Spider!'s Avatar
 
Join Date: Dec 2008
Location: Houston, TX

I must of lost track of the whole body ring issue in the 2k9. I thought they used 7000 aluminum in order to avoid the body washer. ??
__________________
My Feedback
Spider! is offline   Reply With Quote
Old 05-08-2012, 10:01 AM   #8 (permalink)
Post Whore
 
Join Date: Oct 2010
Location: Minnesota!

CCM Fan
@spider - people were reporting body wear so PTP sent out stainless washers to drop inundate front of the spring.
__________________
sQuidvision is offline   Reply With Quote
Old 05-08-2012, 04:45 PM   #9 (permalink)
Formerly known as DMex
 
Ando's Avatar
 
Join Date: Jul 2009
Location: Glen Burnie, MD.

See if PTP will send you a few of those body washers or make you a thicker one so you can install it in your marker. As long as everything else is lining up, the extra thickness at the breach area should fix this. I would tell them to send you another body and return that one if I was you. They made over 200 of those bodies. You have to expect issues with a few. If it wasn't for the 2 yr delay, It would be easier to swallow. This right here is just sh**ty on their part.
__________________
WTB NOXX Tac1 Springfeed and Javelin Twister Barrel...PM Me!!!

Last edited by Ando; 05-08-2012 at 06:03 PM.
Ando is offline   Reply With Quote
Old 05-08-2012, 04:53 PM   #10 (permalink)
Post Whore
 
henchman's Avatar
 
Join Date: Jan 2010

As stated before, I have the body washer.
And Dave at AGD is f the opinion that the valve in fact does not go in far enough.
I'm going to send the body to squid. As he has a couple that work fine.
It will be interesting to see if his valves work fine in mine.

Last edited by Brewtt; 05-18-2012 at 12:58 PM.
henchman is offline   Reply With Quote
Reply

  mcarterbrown.com » Paintball » The Armory » Air Gun Designs

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump


All times are GMT -4. The time now is 08:24 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC