| ||Thread Tools||Search this Thread|
|06-06-2012, 05:59 PM||#1 (permalink)|
Join Date: Jan 2010
Definite 2k9 manufacturing issue
Trying to get to the bottom of my 2k9 issue of not being able to get it up to a proper velocity, I decided to make a quick measurement.
And they're is definitely a manufacturing prolblem.
I measured inside the body from where the valve ring in a regular mag body is, to whe the field screw goes. It was about 2 3/4 inches.
With the 2k9 it's 3 inches.
Thats a huge difference with the small tolerances Automags work under.
Can anyone here with a 2k9 and a standard mag, checkmy measurements.
If those with proper functioning 2k9's report different numbers then I can only surmise that some of these we not milled correctly.
Automags retired. Enmeys are the successor.
|06-06-2012, 10:06 PM||#2 (permalink)|
Join Date: Oct 2008
The 2k9's have been all over the board with different stuff I had mine setup for a few with my red x-valve and it seemed to fire fine. I did have a problem with the gripframe and gadget grip not wanting to go on together weather it was the mounting for the grip being to far back or the holes on the grip frame being to far forward IDK.
|06-06-2012, 10:11 PM||#3 (permalink)|
Closer to home.....
|Thread Tools||Search this Thread|