|
             |
 |
|
 |
| | LinkBack | Thread Tools | Search this Thread |
07-02-2012, 09:14 AM
| #1 (permalink) | |
| Village Idiot  Join Date: Jul 2006 Location: Graniteville VT    | Wierd leak
I have a strange problem. I took a perfectly working classic valve and swapped out the reg for a shocktech aluminum one. With this reg the gun leaks, It's acting like (I think) a power tube oring, leaks, hold the trigger back and the leak stops. Go back to the original reg and the leak stops. Any ideas what in the reg would cause this? Oiling the hell out of the gun didn't stop it.
__________________ WTB http://www.mcarterbrown.com/forums/w...lind-rage.html feedback http://www.mcarterbrown.com/forums/f...-feedback.html Gargoyle FAQ http://isppa.semkhor.com/newswire.asp?ctid=1116 Quote:
| |
|  |
|
07-02-2012, 07:23 PM
| #3 (permalink) |
| Custom User  Join Date: Aug 2008 Location: Vancouver Canada |
Make sure the reg seat is clean and facing the right direction  If that doesn't work replace the seat. Watch part 3 at 6:00 minutes in if your not sure of Automag vids here> Automags.Org Online Forums - Tom Kaye AutoMag YouTube Videos
__________________ feedback http://www.mcarterbrown.com/forums/f...-feedback.html http://www.avratech.com/ |
|
| |
|
07-06-2012, 09:13 AM
| #4 (permalink) | ||
| Man vs Tank  Join Date: May 2010 Location: Courtenay, B.C. |
I did the same to mine with some help from Ando on the shipping side of things (Thanks again ). I had no problems with the switch but did replace all the seals with new ones before assembly anyways.
__________________ Quote:
Quote:
Cruickid's WTB | ||
|
| |
|
|
| Thread Tools | Search this Thread |
|
|
WTB NOXX Tac1 Springfeed and Javelin Twister Barrel...PM Me!!! 
