mcarterbrown.com

mcarterbrown.com (http://www.mcarterbrown.com/forums/)
-   Air Gun Designs (http://www.mcarterbrown.com/forums/air-gun-designs/)
-   -   max output (http://www.mcarterbrown.com/forums/air-gun-designs/207123-max-output.html)

Syko89 07-02-2012 07:10 PM

max output
 
ok so highest out i can find is the ninja shp reg at 1200 so went on there website and saw they do offer preset output up to 2000psi. no aside from the absolute destruction of my wallet and needing a lrg tank would this cause damage to the marker. will be running a tac 1 with y frame.

superman 07-02-2012 10:12 PM

nope max input is 3k into the valve. but i would recommend steel lines for obvious reasons.

zachvetter did a vid with a bulk 3k tank straight to the valve shot 34.5 bps i believe

Justus 07-02-2012 10:35 PM

Yeah, but he was only running about 2200 psi to the valve. Either way, the valve is rated to 3000 so it can surely handle it.

superman 07-02-2012 10:45 PM

super hard to control at that fast though. i have one that goes up to 1300 and cant even play with it like that.

Spider! 07-02-2012 10:51 PM

Ando has one, iirc.

Justus 07-02-2012 10:56 PM

Quote:

Originally Posted by superman (Post 2398784)
super hard to control at that fast though. i have one that goes up to 1300 and cant even play with it like that.

Oh, I agree. Using my ETac in Mech mode is impossible with my SHP set at 1100 psi. I turned it down to 950.

sQuidvision 07-03-2012 12:01 AM

i need to turn down my ninja reg as well... i just dont feel right shooting people this fast:

http://www.youtube.com/watch?v=d_0dyCnAjEQ


All times are GMT -4. The time now is 10:13 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC