Mag leak.... hmmmm
So I got this mag....
It leaked really bad, I swapped the oring inside the RVA (not on the RVA, but the little brass thingy behind it)
I gassed it up, still leaked, but when I pulled the trigger the leak dropped from 100% to like 15% (all down the barrel)
I thought powertube, swapped the powertube oring too (it was beat to death and black)
gas it up, leaks about 50%, when i pull the trigger, the leak stops!
soo where to look now?
leak stops when you pull and hold the trigger?
That would still be the power tube oring... or perhaps a bigger spacer?
Edit: Have you ever watched tom's videos?
Tom's videos still refer to power tube springs not spacers(I think he says lvl 6.5 is the gun in the vid)
I have the same problem, figured it is the spacer but I don't have any others. I am having problems finding a spacer kit. I have found them individually on ebay but what size to buy is the question.
i changed the oring, only leaks when the trigger is not pulled, when i hold the trigger, it stops
i didnt see a spacer inside of it... just a spring, should there be one?
Maybe your spring is worn out. Change to spacers.
EDIT: Before you go out and buy spacers. Stretch out the powertube spring to see if the leaking changes. If it does, you know the spring is no good.
Oh yeah, SS, got your rail bushing in place?
i changed the oring on the powertube cap/tip thingy
didnt realize there was supposed to be an oring at the bottom of the powertube under the spring/spacer (i put one of the blue spacers in) and no more leaks!
sweet! and away you go!
Haha, when all else fails look closely at the blow-up diagram.
|All times are GMT -4. The time now is 10:49 PM.|
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC