Right/Left Feed to Center Feed Conversion
Who has done it.....
Im lookin for pics/how to's/etc
Im debating between buyin a new breech (ule/clamping)
Making a conversion.....
Are you talking about taking a classic left/right and making it center feed or you talking about taking a xmag breach and making it center? Or getting a ule body verses the other two options?
You can also get 2k9 body and have all 3 in one.
i have a magic box mag.
it is left feed.
i hate offset feeds.
im either going to convert it to centerfeed, or just buy a centerfeed.
Luke does it but it is still offset. I think he just miters the feed tube so it goes straight up instead of sideways. Then you put an ego feedneck on. Here is a link.
Doc's Machine did one or at least documented one. Who knows how many he did?
From Doc's Machine gallery
-The Five steps in making your own vertfeed 'Mag body: One, pull the old neck and weld up the hole.
-Two, after it warps from too much TIG heat too fast, hammer it straight on a mandrel. Swing hard.
-Three, grind and sand it smooth again, and redrill the feed hole. Machine the new neck from 303 stainless.
-Four, silver-solder the new neck in place, making sure it's straight, level and square.
-Five, sand and buff it 'til it shiiiines.
ya thats kinda... eh
guess i should go hunt!
You say left feed do you mean warp left? Pic would help determine what you mean exactly.
Ok got ya. I mad some calls regarding making a cf to a warp left and no one would touch it
|All times are GMT -4. The time now is 06:59 AM.|
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC