mcarterbrown.com

mcarterbrown.com (http://www.mcarterbrown.com/forums/)
-   Air Gun Designs (http://www.mcarterbrown.com/forums/air-gun-designs/)
-   -   need help picking a rail for my egomag (http://www.mcarterbrown.com/forums/air-gun-designs/212092-need-help-picking-rail-my-egomag.html)

superman 08-28-2012 12:06 AM

need help picking a rail for my egomag
 
so im looking for a new rail for my egomag, problem is it needs to be a full length rail. meaning the bottom of the rail extends the full length just like the am/mm rails.
i know i don't want an rt length rail

so i can't use the following
dallara
karta
alpha
xm15
don't want to use a splash either because there will be milling involved

im almost done with it

thinking something old school maybe benchmark or taso if i can find one


http://i86.photobucket.com/albums/k9...n/DSC00452.jpg

xvalve w/ ult
effiecncy insert
ule
ule'd rail
sidewinder
etek2 frame
virtue board in the mail

luke-AO 08-28-2012 04:24 PM

I have one of these in stock.
Uses an AM sear, made for the Ego frame and ASA.

http://i550.photobucket.com/albums/i...leson/beta.jpg

superman 08-28-2012 05:10 PM

that won't work because it is already ule'd

luke-AO 08-28-2012 06:03 PM

Wont work how?

D3adpool 08-28-2012 06:05 PM

Thats purty!

Quote:

Originally Posted by luke-AO (Post 2458025)
I have one of these in stock.
Uses an AM sear, made for the Ego frame and ASA.

http://i550.photobucket.com/albums/i...leson/beta.jpg


superman 08-28-2012 06:16 PM

the spot u ule'd is where my rear frame screw goes

DarkNinja 08-28-2012 06:34 PM

Quote:

Originally Posted by superman (Post 2458131)
the spot u ule'd is where my rear frame screw goes

How does your rear frame screw go to any place other than the threaded hole in the valve where he has that frame attached?

superman 08-28-2012 06:36 PM

i drilled and tapped the rail

DarkNinja 08-28-2012 06:39 PM

ah, then you have a screw countersunk into the rail to hold the valve in?

superman 08-28-2012 06:42 PM

no need for countersinking


All times are GMT -4. The time now is 10:06 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC