|
             |
 |
|
 |
| | LinkBack | Thread Tools | Search this Thread |
09-15-2012, 11:32 AM
| #1 (permalink) |
| Paintball is my Obsession  Join Date: May 2011 Location: Pittsburgh, PA | Classic/Smart Mag rebuild kit
I want to pick up a rebuild kit for my Smartmag (post magic box) for the day it finally fails. 6-7 years under my ownership and the only thing I have done to it mechanically aside from disassembly and oiling is installing a Level 10 kit about a year ago. I have not replaced any orings not associated with the Level 10 and still no leaks. Now to the question, does a standard Classic mag rebuild kit...  contain all the necessary orings for a classic valve and a level 10?, or will I need additional orings for the level 10? Thanks, Tony
__________________ Pghp8ntballer's Feedback |
|  |
|
09-15-2012, 02:26 PM
| #2 (permalink) |
| Post Whore  Join Date: Nov 2008 Location: Arkansas River Valley  |
Should be just for the valve. I would send tuna a message telling him what you need. More or less build a kit for your valve.
__________________ Feed Back & WTB/WTT Crossroads Paintball Field - Clarksville, Arkansas 5.5 miles from I40 Arkansas Paintball Exchange <-BST for Arkansas & surrounding states |
|
| |
|
09-15-2012, 09:21 PM
| #3 (permalink) |
| Formerly known as DMex  Join Date: Jul 2009 Location: Glen Burnie, MD. |
You'll need the kit and 2 extra oring for the lvl 10. 1 extra actually since the black one that sits on the carrier NEVER goes bad. Get with Tuna and he'll get you setup.
__________________  WTB NOXX Tac1 Springfeed and Javelin Twister Barrel...PM Me!!!    |
|
| |
|
09-16-2012, 08:50 AM
| #4 (permalink) |
| Paintball is my Obsession Join Date: May 2011 Location: Pittsburgh, PA |
Ok. Thanks guys.
__________________ Pghp8ntballer's Feedback |
|
| |
|
|
| Thread Tools | Search this Thread |
|
|
