mcarterbrown.com

mcarterbrown.com (http://www.mcarterbrown.com/forums/)
-   Air Gun Designs (http://www.mcarterbrown.com/forums/air-gun-designs/)
-   -   micromag with level X valve trouble (http://www.mcarterbrown.com/forums/air-gun-designs/21923-micromag-level-x-valve-trouble.html)

funsi00 09-05-2007 01:51 AM

micromag with level X valve trouble
 
When I gas up, trying to fire the marker. It goes full-auto? Is that a sear adjustment? What is the solution? Just trying to put together a micro-mag with level X valve. Thanks to all who reply!

MedicDVG 09-05-2007 07:07 AM

when my mag did this I was told that the on/off was sticking. Try putting a drop of oil into the on/off and work it around and see if it is still happening.

Robertsr 09-05-2007 08:43 AM

You sure your sear pin isn't missing? It's easy to do after a MicroMag breakdown, and it will cause full auto.

funsi00 09-05-2007 04:49 PM

I will have to check that out. Never actually played with this one. I purchased this micromag with some assembly require. thanks for your help Robertsr

Gimmick 09-05-2007 07:26 PM

few things might be the cause.


-lvl 10 tuning not quite perfect
-velocity too high
-on/off stick
-no sear pin

sdlm 09-05-2007 11:52 PM

Also a worn bolt where the sear catches it can cause this.... but Unless the bolt has been heavily used the on/off is a more likely cause.


All times are GMT -4. The time now is 11:02 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC