mcarterbrown.com  

Reply
 
Thread Tools Search this Thread
Old 08-06-2006, 08:29 PM   #1 (permalink)
Seasoned Member
 
ringer706's Avatar
 
Join Date: Mar 2006

question about r/t'd mags

I'm in the process now of making a Tac-one warp from scratch and in doing so, I had a question about the r/t on automags. I've heard that some regulators don't work all that great or at all on ""bouncing" the trigger because of the recharge rate being sluggish. What I want to know is what is a good tank reg. that is suitable for high/higher rates of fire on an r/t valve and is the one I currently use good enough? (Guerilla Air Ambush HP on a 92/45 tank)
__________________
Feedback
ringer706 is offline   Reply With Quote
Old 08-06-2006, 08:45 PM   #2 (permalink)
MCB Member
 
eric's Avatar
 
Join Date: Apr 2006
Send a message via AIM to eric

Smart Parts Max-Flo 4500 System
Air America Apocolypse System output range 400-1200
AGD 4500 Flatline System output range 600?-1100
CenterFlag DynaFlow System output range 0-1000

And using another reg besides the built in reg will slow the recharge rate down.The more pressure you can feed the valve the more it likes it, well for rapid fire im not sure how much quicker the seals would go by pumping that much pressure in them.Also for a safety precation use stainless line ive had so many pieces of macro line blow its not funny........
eric is offline   Reply With Quote
Old 08-06-2006, 08:50 PM   #3 (permalink)
Seasoned Member
 
ringer706's Avatar
 
Join Date: Mar 2006

I know about that list on Zak's page, But that list is about 2 years old from the looks of it. So do you think there would be any change in regulator performance since then?
__________________
Feedback
ringer706 is offline   Reply With Quote
Old 08-06-2006, 10:49 PM   #4 (permalink)
MCB Member
 
eric's Avatar
 
Join Date: Apr 2006
Send a message via AIM to eric

the only one thats currently being updated is the maxflo(the micro maxflo) but besides that i dont think anyone has changed the way the tanks are really?
eric is offline   Reply With Quote
Old 08-06-2006, 11:38 PM   #5 (permalink)
WVU paintball #19
 
minimag03's Avatar
 
Join Date: Aug 2006
Location: Morgantown, WV

AKA Fan
Unless you want the run-away bouncing like Zak has on his site then your Guerilla air reg will be fine.
minimag03 is offline   Reply With Quote
Old 08-07-2006, 06:35 AM   #6 (permalink)
Seasoned Member
 
ringer706's Avatar
 
Join Date: Mar 2006

I just want my reg to allow it to top out around 20 or so bps. Nothing crazy like Zak though. Thanks for the help.
__________________
Feedback
ringer706 is offline   Reply With Quote
Old 08-07-2006, 07:16 PM   #7 (permalink)
WVU paintball #19
 
minimag03's Avatar
 
Join Date: Aug 2006
Location: Morgantown, WV

AKA Fan
Just to let you know right now. You can't bounce the trigger buy raising the input pressure of your tank if you are using a ULT. That being sair, you will need an adjustable HP tank. I'd go with a Dynaflow by Centerflag. They don't require as much attention as the Max-flos.
minimag03 is offline   Reply With Quote
Old 09-03-2006, 04:08 AM   #8 (permalink)
Seasoned Member
 
Lenny's Avatar
 
Join Date: Aug 2006
Location: Akron area, Ohio

And shims! The shorter the on/off pin, the higher the reactivity. I can keep mine at 16 now! (Except I have to take them out for some fields...)
__________________
Quote:
Originally Posted by pizzaluvr View Post
I have a girlfriend... I just think porn looks better than her.
SUPPORT YOUR LOCAL PRO SHOP!!
Underground Sports
Hudson Drive in Cuyahoga Falls, OH.
(330)923-8916
"More Cool Crap than a Frozen Septic Tank"

AO Feedback
MCB Feedback
Lenny is offline   Reply With Quote
Old 09-05-2006, 11:12 AM   #9 (permalink)
Active Member
 
Special_k's Avatar
 
Join Date: Apr 2006

what kind of shims might you be talking about?
__________________
Guns Kill People Like Spoons Made Rosie Odonnell fat.
Special_k is offline   Reply With Quote
Old 09-06-2006, 03:46 AM   #10 (permalink)
Active Member
 
Join Date: Aug 2006

To bounce the trigger you need the RT on/off, and about 900-1100psi input to the valve. ROF bounce can be achieved by a preset HPA tank at like 750-800, it'll just be harder to keep the string going, and you won't get as high rof.
Gimmick is offline   Reply With Quote
Reply

  mcarterbrown.com » Paintball » The Armory » Air Gun Designs

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump


All times are GMT -4. The time now is 06:34 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC